Cart (0) Check Out
Constant Current Dual LED Driver + Wall Switch

Constant Current Dual LED Driver + Wall Switch

$84.95

Wall Dimmer with dual Constant Current output:              Technical Info

Use low cost wire, low cost LED's and our driver for simple installations - no electrical license needed.  Easy to start yet scaleable to complex systems.

  • Operates just like any standard residential light switch
  • 100% low voltage LED lighting solution
  • Simple on/off switch with dimmer - no network required to operate
  • Drive up to 50 watts of LEDs in series / parallel
    - http://atxled.com/How2 for details
  • Perfect dimming from 2% to 100% - flicker free
  • Input voltage 20 to 60 volts
  • Output voltage from 3 volts to input voltage minus 5
  • DALI communication option
    - DALI enables home automation
    - DALI switch and driver in one device
  • Supports 3-Way switching - using 24 AWG low voltage wire
    - connect to simple switch for remote control
    - connect to door magnet contact for light on door open
  • Spring Loaded connectors for easy installation

Features:

  • DC input 2  22 to 60  V volts
    LED Output 2


    300, 400, 600, 700
    3 to 56 V

    		 mA
    Volts
    2-Way, 3-Way, N-Way Yes any 1 pole light switch
    or contact
    DALI interface 1
    2
    64    		 DALI switch
    DALI slave drivers
    DALI addresses
    pass thru DALI bus    		  

Compatible LED Products 300 or 600 mA , $8 to $20 each:  ( partial list - many others allowed - discard the included drivers )

  • 12 Watt - up to 4    - buy on  Amazon
  •   9 Watt - up to 4    - buy on  Amazon 
  •   6 Watt - up to 8    - buy on  Amazon 
  •   3 Watt - up to 16  - buy on  Amazon 
  •   1 Watt - up to 48  - buy on  Amazon 
  •   under cabinet lights - buy on Amazon
ETL listed Round LED ( $15 to $20 each )

Wire for DC power

  • AWG 18 shielded - buy on Amazon

Channel doubler - split one DR2 output into 2 LEDs 

  • Matching current on 2 LEDs
  • for example 2x 350 mA from one 700 mA channel
  • order code - AL-Splitter

Bus Bar and Failover

  • AL-PowerBus for 12 switches with failover
  • AL-DALI-Bus for 12 switches
  • AL-Struct kit with one each Power and Dali bus

Recommended Power Supplies

  • Meanwell UHP-200R-48 200 watt power supply for 33 6 watt LEDs
  • Meanwell UHP-350R-48 350 watt power supply for 40 9 watt LEDs
  • Meanwell UHP-500R-48 600 watt power supply for 50 12 watt LEDs
Home Automation and Voice Control
  • Control4 to DALI Gateway
  • Alexa to DALI - AL-DALI-WIZ