DIY LED strip lights with Tunable or Fixed White

Regular price $10.00

ATX LED strip lights require a constant current driver for highest lm/watt rating, these are wired in series.   Class 2 limits and off the shelf driver limits, result in a maximum voltage of 45 volts.   This translates into 15 ft of the 3 volt model, or 7.5 ft of the 9 volt model.

They offer 2 watt/ft,  4 watt/ft and 8 watt/ft operation.

The 3 Volt models are available in 7 inch, 9 inch and 12 inch lengths that allow total fixture lengths from 12 inches and up at 2 inch cut lengths.   The maximum length is 14 ft when using drivers with 42 volt maximum outputs.    Operate a 660 mA for 2 watts/ft or 1440 mA for 4 watts/ft.   With a 54v driver, 16 ft is possible

The 6 Volt model is available in 16 inch - same as a 7 + 9 on one board.  The maximum length is 14 ft when using drivers with 42 volt maximum outputs.    Operate a 660 mA for 2 watts/ft or 1440 mA for 4 watts/ft.   With a 54v driver, 16 ft is possible

The 9 Volt models are available in 18 inch lengths that allow total fixture lengths from 19 to 91 inches.   The maximum length is 7.5 ft when using drivers with 48 volt maximum outputs.    Operate a 660 mA for 4 watts/ft or 1440 mA for 8 watts/ft.

The 16 ft models operate a 42 to 54vdc, the maximum length.   The CCT are 1.5 watts per ft and the Fixed are 2.5 watts per ft.

All are perfectly dimmable to 0 mA.